Okolab H301-T-UNIT-BL-PLUS, Руководство пользователя

Страница: 24 / 45

24
In the Objective Heater Calibration progress window press “Options” to access “Advanced Calibration
Param eters”. In this window you can adjust Accuracy and Standard Deviation, which will be calculated over
10 minutes of readings. This allows setting more stringent parameters to the objective heater calibration.
Figure 27. Objective Heater Self Calibration parameters
Tip
►
The higher these values (therefore the less accurate and precise is the calibration), the less time is
taken by the calibration procedure to complete. Use default values to get the most accurate calibration.
Once the calibration procedure is completed, the following message appears.
Figure 28. Objective Heater Self-Calibration end
6.2.1.4 Thermal Cycles
This function allows the incubator to switch between two different temperatures (both temperatures must
be at least 3°C above Room Temperature).
Figure 29. Thermal Cycles Subpage