Okolab H301-T-UNIT-BL-PLUS, Руководство пользователя

Страница: 14 / 45

14
a. CO2-O2 UNIT-BL [0-10; 1-18] and
H301-T-UNIT-BL-PLUS. Units rear panels.
b. CO2-O2 UNIT-BL [0-10; 1-18] and
H301-T-UNIT-BL-PLUS. 3D view.
Figure 6. CO2-O2 UNIT-BL [0-10; 1-18] and H301-T-UNIT-BL-PLUS
The T-Unit must stack on top of the Gas Controller by lining up the bus ports located on the top and bottom
surface of each. When the units are properly connected the Temperature, CO2 and O2 parameters will
appear on the OKO-TOUCH Touch Screen interface Home page. If not all the parameters appear on OKO-
TOUCH Home Page then the Control Units are not properly connected. Please check that the bus ports are
properly aligned with each other.
If you have a Gas Controller and a Temperature Control Unit, it is essential to read both this
manual and the Gas Controller Manual to familiarize yourself with the functions and the
operation of the devices before use.