Ohmeda Ohio 2000 IWS Series, Руководство по эксплуатации и обслуживанию

Страница: 36 / 80

3-12
6600-0255-000 12/20/00
3/Operation
3-12
To return the bassinet to its locked position, align the bassinet with the warmer . Push
the bassinet over the warmer’s alignment/locking track. Continue pushing the bassinet
until its locking pin drops into the socket at the end of the alignment/locking track.
There should be an audible click when the pin drops into position. Lightly push and pull
the bassinet to verify that the two units are securely held together.
The bassinet’s front casters can be locked in position by pressing the locking button on
each caster.
3.5 Bed Platform Operation
(See Figure 3-4.)
On large and small bed units, the bed platform tilts for Trendelenburg and reverse
Trendelenburg positioning capabilities. Lift or push down on the tilt handle to position
the bed.
WARNING:
w
Inspect all patient connected tubes or wires before and after moving or
tilting the bed. Tilting or moving the warmer bed up or down can pull on
tubing or leads connected to the patient. This may disconnect tubes or
leads, restrict gas or liquid flow, or move sensors out of position.
Note: Tilting the bed mattress can affect the operation and performance of the radiant
warmer.
The model 3500 bassinet bed platform also tilts for Trendelenburg and reverse
Trendelenburg positioning. To raise the front of the bed platform, pull the handle out
and lift the bed. Release the handle so it engages in the upper detent. To lower the
front of the bed platform, pull the handle out and lower the bed. Release the handle so
it engages in the lower detent.
CI.10.009
CI.10.014
Figure 3-4
Bed platform operation