5-2
6600-0255-000
12/20/00
5/Maintenance
5-2
5.2 Circuit Breaker Reset
(See Figure 5-1.)
The warmer is equipped with a combination power switch and manual-reset circuit
breaker located on the left side of the controller assembly (as viewed from the front),
near the power cord socket. The circuit breaker limits the maximum current drawn.
If this circuit breaker trips when the warmer is operating, the power switch is deacti-
vated to the Off position. To reset the circuit breaker, return the power switch to the On
position. If the circuit breaker trips again, service is required.
Place the switch in the
øøøøø
(On) position to
reset the circuit breaker.
CI.05.009
Figure 5-1
Circuit breaker reset
5.3 Lamp Replacement
WARNING:
w
w
w
w
w
Disconnect the Warmer power cord and allow the unit to cool before
replacing the alarm or observation lights.
A. Alarm Lamp Replacement
(See Figure 5-2.)
Lamp: GTE Sylvania 120 MB 6W, Ohmeda Medical Stock No. 0690-2100-315.
1.
Disconnect the Warmer power cord and allow the unit to cool for 10 minutes.
Содержание Ohio 2000 IWS Series
