Ohmeda Ohio 2000 IWS Series, Руководство по эксплуатации и обслуживанию

Страница: 18 / 80

2-2
6600-0255-000 12/20/00
2/Setup and Checkout Procedures
2-2
3. For the model 3500, separate the warmer from the bassinet.
4. For units with casters, check that all casters are in firm contact with the floor and that
the warmer is stable and moves freely.
For the model 3500, check that all six casters on the warmer move freely.
Note: On the model 3500, it is possible that the two center casters may not be in
contact with the floor at all times.
5. Lock the two front casters and check that the warmer is held in place. On the model
3500, lock the two rear casters and check that the warmer is held in place.
6. For the model 3500, place the bassinet on a level surface. Check that all four
casters are in firm contact with the floor and that the Bassinet moves freely.
7. For the model 3500, lock the two front casters and check that the Bassinet is held in place.
8. Examine the power cord for damage. Replace the power cord if damage is evident.
9. Examine the unit for objects placed on top of the heater assembly.
10. Check heater-to-bed spacing falls within ranges specified in "1.3 Heater Assembly".
WARNING:
w
Do not place any accessories or other objects directly over the bed sur-
face. This may block radiant heat energy and lead to cooling of the infant.
w
Do not place items on top of the heater assembly. Items placed on top of
the heater assembly can fall and injure the patient, prevent adequate
ventilation of the heater assembly, and may pose a fire hazard.
B. Heater Assembly Rotation
Rotate the Heater Assembly to the side and then back to the normal position. Check for
a smooth rotation.
C. Mechanical Checks
1. Check the operation of the bed sides. The bed sides should operate smoothly.
WARNING:
w
Regularly inspect the bed side panel latching mechanism, and the bedside
locking mechanism on the model 3500, to ensure proper operation and to
prevent the infant falling off the bed.
2. Check the operation of the tilt mechanism. Verify that the bed platform operates
smoothly and locks in normal, Trendelenburg and reverse Trendelenburg positions.
3. If the drawer package is installed, check that all the drawers open and close freely.
On units with the rotating drawer package, make sure the drawers rotate from front
to 90° left and right and firmly stop in the detented positions.
WARNING:
w
Overloading the drawers can affect the stability of the unit. Limit the load
to 4.6 kg per drawer.
4. For the model 3500 bassinet, remove the keys from the top drawer and lock it.
Check that the drawer is securely held closed.