Troubleshooting and routine maintenance
129
C
Error and maintenance messages
C
As with any sophisticated office product, error and maintenance messages may be displayed. The
most common error and maintenance messages are shown below.
Error Message
Cause
Action
Access Error
The device is removed from the
USB direct interface while the
data is processing.
Press
Stop/Exit
. Reinsert the device and try to
print with direct print or PictBridge.
Calibrate
Calibration failed.
Press
Black Start
or
Color Start
and try it
again.
Do one of the following:
Turn off the machine’s power switch. Wait a
few seconds, then turn it on again.
Put in a new drum unit. (See
Replacing the
drum unit
on page 172.)
Put in a new belt unit. (See
Replacing the
belt unit
on page 178.)
Put in a waste toner box. (See
Replacing the
waste toner box
on page 183.)
If the problem continues, call Océ Technical
Support.
Cartridge Error
Put the Black (K)
Toner Cartridge
back in.
1
1
The toner
cartridge color
with the problem is
shown in the
message.
The toner cartridge is not installed
properly.
Pull out the drum unit, take out the toner
cartridge that is indicated on the LCD, and put it
back into the drum unit again.
Change Parts
Belt Unit
It is time to replace the belt unit.
Replace the belt unit. (See
Replacing the belt
unit
on page 178.)
Change Parts
Drum
The drum unit is near the end of
its life.
Use the drum unit until you have a print quality
problem; then replace the drum unit with a new
one.
(See
Replacing the drum unit
on page 172.)
The drum unit counter was not
reset when a new drum was
installed.
Press
Menu
,
8
,
4
, and then
a
or
b
to choose
Drum.
Press
OK
and press
1
to reset the drum unit
counter.
Change Parts
Fuser Unit
It is time to replace the fuser unit. Call Océ Technical Support to replace the fuser
unit.
Содержание cx2100
