Novexx Solutions ALS 30 Series, Руководство по установке

Страница: 25 / 59

Installation Manual
ALS 30x
02/2016 | 00 25 Installation and Deinstallation
Mounting the unwinder
Tool:
– 8 mm hex socket driver
Prerequisites:
– RH unwinder : The mounting positions top right and
side right require a RH unwinder, see rating plate
[32arrow].
– LH unwinder : The mounting positions top left and
side left require a LH unwinder, see rating plate
[32arrow].
Also refer to chap. “About the unwinder” auf Seite 206.
Installing the unwinder holder
 Determine the operation position of the ALS 30x.
– Admissible operation positions for top labelling see
“Top labelling” auf Seite 13, for side labelling see
“Side labelling” auf Seite 15.
 Mount the unwinder holder to the ALS 30x basic
module, according to the determined operation po-
sition.
 Tighten the 4 screws [31A].
– Use the screws delivered with the device [31B].
Tightening torque:
– 4 screws [31B] on the unwinder holder foot
(DIN EN ISO 4762 M10x25 A2) . . . . 45 Nm
[31] Mounting screws at the unwinder foot.
[32] Rating plate (arrow) at the unwinder.
A