Novexx Solutions ALS 30 Series, Руководство по установке

Страница: 33 / 59

Installation Manual
ALS 30x
02/2016 | 00 33 Installation and Deinstallation
Connecting to the mains power supply
The ALS 30x dispenser comes with a loose machine
connector [50].
– Article number: A9546
 Mount the machine side connector as follows onto
the power cable.
 Connect the other cable end to the mains.
Pay attention to the definite phase position [51L]
when doing so.
WARNING!
The machine is connected with the mains supply! Contact with energised components can result
in life-endangering currents through the body as well as burns.
 The mains connection may only be performed by authorised specialists who are aware of the
risks involved.
 Ensure that the machine is switched off before connecting power cable.
 Only operate the machine using the system voltage indicated on the nameplate.
 Only plug machine in to a correctly installed socket with an earth contact.
 The length of the power cable must not exceed 3m.
The machine side power plug has a definite phase position.
 Pay attention to the phase position when connecting the machine.
Power switch = Separator
 If the power switch can not be accessed, e. g. due to the mounting position of the machine,
an additional accessible power switch must be installed.
[50] Machine connector of the power cable.