Novexx Solutions ALS 30 Series, Руководство по установке

Страница: 44 / 59

Installation Manual
ALS 30x
02/2016 | 00 44 Installation and Deinstallation
Connection Diagram
[71] Connection diagram alternativ label sensor. Jumper descripti-
on see ch. (p. 46)
Example: capacitive label sensor
– Application: transparent Labels
– Order numbers: A7775 (di-soric sensor including
mounting material and connection cable);
A101452 (sensor only)
– See www.di-soric.de
Installation:
Tools:
– Hexagon socket drivers 4/6 mm
 Turn out screw [72C] and remove the dispensing
edge [72E].
 Remove the screws from the bottom ends of the
holding rods. Take off the dispensing edge
holder [72D].
 Push the sensor holder [72A] onto the holding rods
and fix it with the thumb screw [72B].
 Reinstall dispensing edge holder and dispensing
edge.
 Connect the cable.
+24V
+24V
NPN-Configuration
NPN-Signal
PNP-Signal
PNP-Configuration
2,2k
1k
1k
1,5k
Signal
Input
GND
Jumper
(default: open)
1
4
3
2
2,2k
CPU
Sensor
connector
[72] L-shape dispensing edge with capacitive label sensor
installed (Leuze type at LH machine).
C
E
D
B
A