Novexx Solutions ALS 30 Series, Руководство по установке

Страница: 49 / 59

Installation Manual
ALS 30x
02/2016 | 00 49 Installation and Deinstallation
Connecting
 Plug the roll diameter sensor in to the connector
shown [83 arrow].
Alternatively, the OD sensor can be connected to the
optional applicator interface (see chapter “Pin assign-
ment for applicator connection” on page 180).
Enabling
 Set
MACHINE SETUP > OD sensor warn.
to „Error“ or
„Warning“.
 Set
MACHINE SETUP > OD Sens. polarity
to „
Level low acti-
ve
“.
If the optional applicator interface board is installed, but
the standard signal interface is supposed to be used:

Set SIGNAL INTERFACE >ACTIVE INPUTS > OD sensor si-
gnal
to „Default input“.
Connection diagram
[84] Connection diagram photoelectric OD sensor
[83] Connection (A) for OD sensor
A
+24V
+24V
Signal
PNP input
3,8k
1k
Signal
GND
1
4
3
2
10k
Sensor
connector
CPU