Novexx Solutions ALS 30 Series, Руководство по установке

Страница: 52 / 59

Installation Manual
ALS 30x
02/2016 | 00 52 Installation and Deinstallation
Internal OD-sensors
The internal OD-sensors are integrated in the material
unwinder. Precondition for activating the sensors is,
that they are connected to the ALS 30x.
Two unwinders can be connected overall. Each
unwinder requires a cable kit.
Prerequisite:
– Cable kit (article number A9767)
Connecting
 Plug both cables with the female connectors to the
unwinder [88A].
 Plug both cables with the male connectors to the
machine: Connections [89A+B] or [89C+D].
Activating
Warning , if the critical roll diameter is reached:
 Set the required minimum diameter in
MACHINE SETUP > Material warning
.
Error message , if the material roll is completely
unreeled:
 Set
MACHINE SETUP > Material end err
to „On“.
[87] Cable kit for internal OD-control (article number A9767).
[88] Connections at the unwinder.
[89] Connections for OD-sensors.
A
D A
B C