Novexx Solutions ALS 30 Series, Руководство по установке

Страница: 32 / 59

Installation Manual
ALS 30x
02/2016 | 00 32 Installation and Deinstallation
Setting length of the short/long dispensing edge
holder
The length adjustment range depends on the
type of dispensing edge holder and on the
mounting angle. In some cases, it may be
advisable to shorten the holding rods at their
top ends.
 Loosen 4 set screws [47A].
 Shift the holder rods [48A] to the required height.
 Tighten the set screws.
Setting length of the Euro dispensing edge holder
 Release clamp levers [49A] and [49B].
 Roughly push the dispensing edge [49C] into the fa-
voured position (rough adjustment).
 Tighten the upper clamp lever [49A].
 Move the dispensing edge to its final position by ro-
tating the hand wheel [49D] (fine adjustment).
– One rotation of the hand wheel moves the dispen-
sing edge by 2 mm in the hight.
 Tighten the lower clamp lever [49B].
[47] Short dispensing edge holder in 0°-position.
[48] Setting the length of the dispensing edge holder.
A
A
[49] Setting the length of the Euro dispensing edge holder.
A
B
C
D