Novexx Solutions ALS 30 Series, Руководство по установке

Страница: 13 / 59

Installation Manual
ALS 30x
02/2016 | 00 13 Please observe the following
Protection against injuries that can result from mechanical actions
0.1
(ALS 104 with splash guard) The power cable cannot be pulled off from the machine side power
connector .
 If the machine is connected to a cabinet, a suitable and accessible power separator must be
provided by the system integrator.
Before any repair work:
 Detach the machine from power supply.
 Check to ensure it is de-energised.
 Secure the power supply against unintentional or unauthorised switch-on.
Casing:
 Before opening the casing and before removing the AUM module or the PUR module, pull the
power plug.
The casing may only be opened by trained personnel and when the machine is de-energised.
 Only put the machine into operation when the rear wall of the casing is correctly in place.
 Only put the machine into operation when the rear housing is correctly in place and when the
AUM module and the PUR module are correctly installed.
If the machine must be switched on while the casing is open for repair or inspection:

Never touch energised components. This also applies to components with low voltages.
Ensure the flawless condition of the electrical system:
 Regularly check the electrical equipment.

Only connect the machine to other machines if these meet the requirements for a SELV cir-
cuit, in accordance with EN 60950.

Re-tighten loose connections.
 Immediately replace damaged lines.

After assembling, check the printer according to the regulations relevant in your country.
WARNING!
Acute risk of injury and long-term bodily injury from working with heavy loads!
 Lift or carry the machine with a minimum of 2 persons. If possible, use a crane or other lifting
device.
 Only use suitable and defect-free restraining devices during transportation and installation.

Never allow the machine to stand with loosened mounting brackets, not even for a short time.
 If the machine is fastened to a movable support: Ensure it can not tip over.
Risk of accident due to uncontrolled machine start-up!

Before doing any repair work, switch off the machine and pull the power plug.