Novexx Solutions ALS 30 Series, Руководство по установке

Страница: 28 / 59

Installation Manual
ALS 30x
02/2016 | 00 28 Installation and Deinstallation
Installing short dispensing edge holder
For mounting angle > 0°, an additional deflection roller
has to be mounted:
Article number deflection roller:
– A9724 for ALS 306
– A9808 for ALS 309
 Swivel the dispensing edge holder to the required
angle and screw it to mounting point [38A].
– The screw can be reached through the hole in the
top cross beam [39].
 Close the hole using the plastic cap.
Mounting angle > 0°:
 Remove the AUM, see chapter “Removing the
AUM” auf Seite 218.
 Remove the cap from hole [38B].
 Push the deflection roller axle into the hole [38B]
and fix it with a screw from the opposite side.
 Remount the AUM.
[41] Short dispensing edge holder swivelled 45°.
[38] Mounting points:
A Mounting hole for short dispensing edge holder
B Mounting hole for deviation roller
[39] Fixing the dispensing edge holder.
[40] Short dispensing edge holder in 90°-position
A
B