Nortel 1002rp, Техническое обслуживание и диагностика

Страница: 10 / 218

Task List Standard 1.11
10 CallPilot
To replace the SCSI power cable.................................................. 121
To hot-swap a cooling fan ............................................................. 128
To replace the fuse........................................................................ 131
To replace the alarm board ........................................................... 133
To replace the status display panel............................................... 138
To replace hot-pluggable SCA SCSI hard drives .......................... 144
To replace media drives ................................................................ 146
To remove the media drive carrier from the chassis ..................... 149
To replace a media drive............................................................... 151
To configure the tape drive............................................................ 155
To install a new tape drive (no tape drive previously installed) ..... 156
To determine the current RAID firmware version: ......................... 161
To replace the LSI1600 card with the LSI320-2 card. ................... 163
To configure an LSI Elite 1600 or LSI320-2 RAID system ............ 165
To perform a consistency check.................................................... 170
To split the RAID ........................................................................... 171
To synchronize the RAID after a successful operation ................. 173
To synchronize the RAID after an unsuccessful operation ........... 173
To add two MPB96 boards and two T1 PCI cards ........................ 180
To add two MPB96 boards............................................................ 184
To replace an MPB96 board ......................................................... 189
To replace a faulty D/480JCT-2T1 card ........................................ 195
To test the D/480JCT-2T1 card..................................................... 197
To replace the SBC card ............................................................... 205
To upgrade the BIOS .................................................................... 207
To configure the Pentium III SBC.................................................. 209
To add an SDRAM DIMM to the SBC card ................................... 210