Nortel 1002rp, Техническое обслуживание и диагностика

Страница: 117 / 218

January 2007 Replacing basic chassis components
1002rp Server Maintenance and Diagnostics 117
1 Loosen the thumbscrews at the top right and left of the failed power
supply module (see A in the following diagram).
If needed, use a flat-blade screwdriver. The thumbscrew must
rotate freely and not contact the chassis threads.
2 Grasp the molded horizontal handles on the power supply module
and pull the power supply module free from the chassis (see B in
the preceding diagram).
3 Align the replacement module with the empty chassis bay.
4 Slide the replacement power supply module into the bay until the
module is secured by its connector. Use some force, if necessary.
5 Secure the power supply module to the chassis with two
thumbscrews at the corners of the power supply faceplate.
G101731
B
A