Nortel 1002rp, Техническое обслуживание и диагностика

Страница: 40 / 218

Using Windows online diagnostic tools Standard 1.11
40 CallPilot
The ping command
The ping command sends an echo request to a specified host. Use this
command to verify network connectivity to the remote device.
Ping command syntax
The ping command uses the following syntax:
ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL]
[-v TOS] [-r count] [-s count]
[[-j host-list] | [-k host-list]]
[-w timeout] destination-list
Table 3: ping command extensions
Parameter Description
-t Pings the specified host until interrupted.
-a Resolves addresses to host names.
-n count Specifies the number of echo requests to send.
-l size Sends buffer size.
-f Sets Don’t Fragment flag in packet.
-i TTL Specifies the Time To Live
-v TOS Specifies the Type Of Service
-r count Specifies the number of Record route for count hops
-s count Specifies the number of Time stamp for count hops
-j host-list Specifies the Loose source route along host list
-k host-list Specifies the Strict source route along host list
-w timeout Specifies the Timeout in milliseconds to wait for each
reply