Nortel 1002rp, Техническое обслуживание и диагностика

Страница: 72 / 218

Using CallPilot Manager to monitor hardware Standard 1.11
72 CallPilot
The Maintenance screen
Use the Maintenance screen in CallPilot Manager to do the following:
„
Obtain general information about components.
„
View component states.
„
Start and stop components.
„
Run integrated diagnostic tests.
„
View the results of the last diagnostic test run against a component.
What the Maintenance screen provides
The Maintenance screen identifies the server platform and switch
connectivity type. It also provides a tree that, when expanded, lists the
physical and logical hardware components down the left side of the
screen. To list the server hardware components, click the plus sign (+) at
the top of the tree. To list the subcomponents for each component, click
the plus sign (+) beside the component.
Note: The components that are listed on the Maintenance screen are
based on the CallPilot server type and the switch that is connected to
CallPilot. The examples in this chapter are for illustration purposes and
may not appear exactly the same on your system.
Figure 6 on page 73 shows a partially expanded tree for the 1002rp
server.