manualshive.com logo in svg

Nortek 2GIG GC3, Инструкция по установке и программированию

Поделиться
Скачать
Nortek 2GIG GC3 Скачать руководство пользователя страница 82

Copyright © 2019 Nortek Security & Control LLC

82

The menu closes, the device appears in normal text on the 

Smart Home Devices

 screen, and it also appears in Smart 

Home Control screens.

Smart Home Devices – Unhidden Device

2. Tap 

 to return to the 

Smart Home Settings

menu.

Identify

This option lets you identify a device from the control panel. 
Tapping 

Identify 

activates the device (for example, a light 

module will turn on and then turn off). This feature can be 
helpful if you add multiple devices to the system without 
renaming them at the time of installation.

Smart Home Devices – Identify

Remove

This option lets you remove a non-communicating node 
from the system. This option only appears for a device that 
is not communicating with the system.

Note:

 Non-communicating devices are indicated by 

an alert icon (

).

To remove a non-communicating node from the system:

1.    Tap the menu button (

) next to the non-

communicating device and tap 

Remove

.

Smart Home Devices – Remove

A con

fi

 rmation screen appears.

Smart Home Devices – Remove Confi rmation

2. Tap 

Remove

 to delete the device from the network.

3. Tap 

 to return to the 

Smart Home Settings

menu.

Rename

This option lets you rename devices that have already been 
added to the system.
To rename a device:

1.  Tap the menu button (

) next to the device and tap 

Rename

.

Smart Home Devices – Rename

Содержание 2GIG GC3





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды