Copyright © 2019 Nortek Security & Control LLC
59
»
30 Seconds: Turns the feature ON. 30 seconds
after a wire cut is detected, the system displays a
trouble alert on the touchscreen and also transmits
a trouble report to the Central Station.
»
45 Seconds: Turns the feature ON. 45 seconds
after a wire cut is detected, the system displays a
trouble alert on the touchscreen and also transmits
a trouble report to the Central Station.
Q29: CS lack of usage noti
fi
cation time, in days
(0-255)
Con
fi
gures the system to monitor itself for lack of usage. If
the system is not armed for the number of days you specify
here, an inactivity report is sent to the Central Station.
Choose one of these options:
»
0 Days: Turns this feature OFF.
»
1-255 Days: Turns this feature ON and transmits
an inactivity report to the Central Station after the
speci
fi
ed number of days.
»
† 7 Days: Turns this feature ON and transmits an
inactivity report to the Central Station after seven (7)
days of inactivity.
Q30: Radio modem network failure time, in min-
utes (0-255)
Con
fi
gures the system to display a trouble alert on the
touchscreen when the system loses its cellular radio
network connection. The number of minutes you specify
here de
fi
nes the amount of down time that must pass
before the system issues a trouble alert report. Once
network service is restored for
fi
ve (5) minutes, the trouble
alert condition automatically clears itself.
Choose one of these options:
»
0 Minutes: Turns the feature OFF. The system does
not issue a trouble alert
»
1-255 Minutes: Turns the feature ON. Use the
touchscreen’s numeric keypad to enter the number
of minutes between 1 and 255.
»
† 30 Minutes: Turns the feature ON and issues a
trouble alert on the GC3 Panel after 30 minutes of
down time.
Q31: Radio network failure causes trouble
Con
fi
gures the system to display a trouble alert on the
touchscreen when it logs a trouble alert condition with the
cellular network connection. The GC3 Panel will display
an alert message on the touchscreen after the number of
minutes speci
fi
ed in “Q30: Radio modem network failure
time, in minutes (0-255)” above expires.
Choose one of these options:
»
† Enabled: Turns the feature ON. The GC3 Panel
display a visual trouble indicator after a cellular radio
network failure.
»
Disabled: Turns the feature OFF. The GC3 Panel
will not display a visual indicator after a cellular radio
network failure.
NOTE:
Regardless of the setting selected here, a
radio network failure will always be logged in the
System History.
Once the network connection is restored, the system
automatically clears the visual indicator. A record of the
trouble alert condition is stored in the
System History
.
Q32: Radio network failure reports
Con
fi
gures the system to transmit a trouble report to the
Central Station when the system detects a cellular radio
network failure.
Choose one of these options:
»
† Enabled: Turns the reporting feature ON. The GC3
Panel will transmit a trouble report to the Central
Station after a cellular radio network failure.
»
Disabled: Turns the reporting feature OFF. The GC3
Panel will not transmit a trouble report to the Central
Station after a cellular radio network failure.
Q33: Broadband network failure time in minutes
Con
fi
gures the system to display a trouble alert on the
touchscreen when the system loses its broadband network
connection(WiFi or Ethernet). The number of minutes you
specify here de
fi
nes the amount of down time that must
pass before the system issues a trouble alert report. Once
the broadband connection is restored for
fi
ve (5) minutes,
the trouble condition automatically clears itself.
Choose one of these options:
»
0 minutes: Turns the feature OFF. The system does
not issue a trouble alert
»
1-255 minutes: Turns the feature ON. Use the
touchscreen’s numeric keypad to enter the number
of minutes between 1 and 255
»
† 30 Minutes: Turns the feature ON and issues a
trouble alert on the GC3 Panel after 30 minutes of
down time.
Q34: Broadband network failure causes trouble
Con
fi
gures the system to display a trouble alert on the
touchscreen when it logs a trouble alert condition with the
broadband network connection(WiFi or Ethernet). The GC3
Panel will display an alert message on the touchscreen
after the number of minutes specifed in “Q33: Broadband
network failure time, in minutes (0-255)” above expires.
Choose one of these options:
»
† Enabled: Turns the featur ON. The GC3
Panel displays a visual trouble indicator after the
broadband network failure.
»
Disabled: Turns the feature OFF. The GC3 Panel
will not display a visual indicator after a broadband
network failure. Once the network connection is
restored, the system automatically clears the visual
indicator. A record of the trouble alert condition is
stored in the System History.
