Copyright © 2019 Nortek Security & Control LLC
57
system with the Silent Exit feature enabled, the
system will restart the exit countdown using the
Silent Exit timer, instead of the Exit Delay timer.
NOTE:
When the Exit Delay Restart feature is
enabled on the system and the user triggers the
Exit Delay Restart feature, the Quick Exit button is
disabled.
Q16: Allow quick exit
Con
fi
gures the system to allow users to quickly exit the
premises while the system is armed in Stay Mode. When
this feature is turned ON and a user taps Arm Stay, a Quick
Exit button appears on the System Armed screen. When
a user taps Quick Exit , the system starts the Exit Delay
countdown and the user must exit the premises before
the countdown expires. After the countdown expires, the
system automatically re-arms itself in the speci
fi
ed arming
mode.
Choose one of these options:
»
† Enabled: Turns the feature ON. This enables the
Quick Exit button on the System Armed screen.
»
Disabled: Turns the feature OFF.
NOTE:
The Quick Exit button is not available on
the System Armed screen when the user invokes
the Exit Delay Restart feature. See “Q15: Exit delay
restart.”
Q17: Quick bypass
Con
fi
gures the system to allow users to bypass a sensor
without prompting the user to enter a user code. This
feature can be assiged individually for each Smart Area.
(Smart Areas feature must be enabled (Q69) for settings
for S2-S4 to affect the system) Typically, this feature is
disabled, so a user must enter a valid user code before
bypassing a sensor.
Choose one of these options:
»
Enabled: Turns the feature ON.
»
† Disabled: Turns the feature OFF.
Q18: Alert on disarm with keyfob after alarm
Con
fi
gures the system to activate a unique sound when
the system in the alarm state is disarmed by a keyfob.
The unique sound is four (4) beeps from the GC3 Panel’s
speaker and four (4) chirps from an external alarm sounder
(if installed).
Choose one of these options:
»
Enabled: Turns the feature ON. The system emits
the unique sound.
»
† Disabled: Turns the feature OFF.
Q19: Keyfob arm/disarm con
fi
rmation
Con
fi
gures the system to activate a unique sound when
the system is armed/disarmed with a keyfob. This feature
can be assiged individually for each Smart Area. (Smart
Areas feature must be enabled (Q69) for settings for S2-
S4 to affect the system) When enabled, the GC3 Panel’s
speaker emits one (1) beep when arming and two (2)
beeps when disarming the system with a keyfob. If an
external alarm sounder is installed the system sounds one
(1) chirp when arming and two (2) chirps when disarming
the system.
Choose one of these options:
»
Enabled: Turns the feature ON. The system emits
the unique sound.
»
† Disabled: Turns the feature OFF. The system does
not emit the unique sound.
Q20: Keyfob/remote arming mode on system not
ready
De
fi
nes how the system behaves when the system is
armed remotely while sensors are open.
Choose one of these options:
»
† Auto-Bypass with Zone Participation on Restore:
Automatically bypasses all open sensors when
the system is remotely armed and, while armed,
automatically removes the bypass if the sensor is
restored to its normal state.
»
Auto-Bypass: Automatically bypasses all open
sensors when the system is remotely armed.
»
Arm Only When System Ready: Does not allow the
system to arm remotely when sensors are open.
Q21: Z-Wave feature
Con
fi
gures the system to show or hide the Smart Home
Controls button on Home screen of the touchscreen. When
this feature is enabled, it provides users with access to the
smart devices on the network, as well as with the ability to
edit scenes and rooms.
Choose one of these options:
»
Disabled and Hidden: Hides the Smart Home
Controls button on the Home screen.
»
Disabled but Visible: Shows the Smart Home
Controls button on the Home screen. When a user
taps the button, the This feature is not currently
activated message displays.
»
Enabled with Local Scenes Hidden: Shows the
Smart Home Controls button, feature is enabled,
and Tile for Scenes is hidden.
»
† Enabled: Shows the Smart Home Controls button
on the Home screen. Users can operate smart
devices from the touchscreen or remotely.
Q22: Smart Home Controls require master code
Con
fi
gures the system to prompt the user for an active,
four-digit user code when attempting to access the Smart
Home Controls menu (if enabled). See “Q21: Z-Wave
feature “ above.
