manualshive.com logo in svg

Nortek 2GIG GC3, Инструкция по установке и программированию

Поделиться
Скачать
Nortek 2GIG GC3 Скачать руководство пользователя страница 8

Copyright © 2019 Nortek Security & Control LLC

8

Capabilities

The system includes these capabilities:

 

»

Smart Areas:

 Smart Areas allows for partitioning the system. Partitioning is the process of dividing security 

sections of a home or building into smaller areas so that users can arm some sections of the house while leaving 
other areas disarmed. This provides home and building owners both security and convenience, as it allows them to 
walk through their structure without concern of tripping alarms for areas they’d like to keep secure and armed. 

 

»

Security Codes: 

The system supports a maximum of 100 unique, programmable, security codes for accessing 

system functions. You are provided with one (1) Master User Code, one (1) Duress Code, and one (1) Installer 
Code (reserved for use by 2GIG alarm dealers and installers), and the ability to create 98 additional user codes for 
accessing the system.

 

»

Z-Wave

® and 

Z-Wave Plus

™ 

Compatibility:

 Installers (and end users, if con

fi

 gured on the system) can add up 

to 232 smart home devices to communicate with the GC3 Panel using the Z- Wave and Z-Wave Plus wireless 
communication protocol. The GC3 Panel can be included and operated in any Z-Wave network with other Z-Wave 
certi

fi

 ed devices from other manufacturers and/or other applications. All non-battery operated nodes within the 

network will act as repeaters regardless of vendor to increase reliability of the network. This device is a security 
enabled Z-Wave Plus product that is able to use encrypted Z-Wave Plus messages to communicate to other 
security enabled Z-Wave Plus products.

 

»

2-Way Voice:

 (Optional) Operators at the Central Station can communicate directly with end users through the 

GC3 Panel . Operators can also silently listen-in after receiving a user duress report.

 

»

Date, Time, and Weather Forecasts

1

: Users can view the current date, time, and weather forecast in an easy-to-

read format.

 

»

System Vocabulary/Voice Descriptors: 

A list of vocabulary words integrates with the on-screen user interface 

and audio announcements. This lets installers customize the sensor names that display on the GC3 Panel , as well 
as for the audible system announcements. For example, when someone opens the front door, the system can be 
set up to announce “front door.”

1

 Date, Time and Weather Forecasts are supported by most Remote Service Providers in most regions. Consult your provider to determine if this feature is enabled.

Содержание 2GIG GC3





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды