manualshive.com logo in svg

Norstar StarTalk Mini, Руководство по установке

Поделиться
Скачать
Norstar StarTalk Mini Скачать руководство пользователя страница 51

Section 2: Learning about 

2    9

Personal

Personal Mailboxes are assigned by your System Coordinator and maintained
by the mailbox owner. A Personal Mailbox can be a User or Guest Mailbox,
For more information about your Personal Mailbox features and options, refer to
Section 4: Your Personal Mailbox.

User Mailboxes

User Mailboxes can be assigned to each user who has an operating 
extension. User Mailboxes store the messages for users who are unable to
answer their telephone.

Guest Mailboxes
Guest Mailboxes provide temporary employees and guests with access to
internal messaging and call routing features. Guest Mailboxes do not have an
operating extension. To request an Guest Mailbox, see your System
Coordinator.

Information Mailboxes provide greetings that relay important company or

Mailboxes

department messages. information Mailboxes do not have an operating
extension, To request an Information Mailbox, see your System Coordinator.

Mail box

Only a few rules apply to the 

 mailboxes. Remembering these rules 

make using your 

 mailbox a simple, everyday task.

The mailbox rules are:

1.

You must always enter a password.

2 .

A mailbox can be opened from any 

 telephone from the

display prompt by entering the mailbox number and password

combination.

When a mailbox is assigned to a 

 telephone, the display always

shows the 

 prompt. To reach the 

 prompt, press

 

o r  

When a 

 single line display is being used, press 

q

to reach the 

 display prompt.

3 .

A mailbox must be initialized before it can be used.

 Mini Reference Guide

Содержание StarTalk Mini





















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды