manualshive.com logo in svg

Norstar StarTalk Mini, Руководство по установке, Страница: 320 / 372

Поделиться
Скачать
Norstar StarTalk Mini Скачать руководство пользователя страница 320

Section 13: Troubleshooting 

 13    3

Feature 981

Whenever the Log prompt appears on the display, it can be caused by the

produces a

station not having an assigned mailbox. If the extension does not have an

“LOG” prompt

assigned mailbox, 

 will request both a mailbox number 

and a password.

on the 

display

 

For 

 to operate, it must have a mailbox number length that is the same

and Mailbox

as the 

 DN length. If these lengths differ, you must change the 

Numbers are

mailbox number 

  Refer  to Appendix C: Resetting 

different

lengths

The following conditions list some problems that might be encountered with the

 operation of 

Mailboxes

A mailbox will not accept messages when:

are not

accepting 

The mailbox is not initialized.

messages

A mailbox cannot receive messages until it has been initialized by the
mailbox owner. Instruct owners to initialize their mailboxes. Refer users
to the 

 Mini User Card,  or provide instructions from  Section 6  in

this guide.

2.

A mailbox is full.
If a mailbox is full, instruct the mailbox owner to delete all or some of the
messages in the mailbox.

3.

The Message Storage Pack is full.

 notifies you when the Message Storage Pack is reaching its

capacity. To determine if the Message Storage Pack is full, print the
Message Usage Report. This report shows you the available minutes of
storage remaining on 

Messages are

If messages are being removed that are recent (less than seven days), check

being lost in a

the message retention period in the mailbox Class of Service. To check the

mailbox

Class of Service, refer to  Changing a mailbox Class of Service, Section 10.

 Mini Set Up and Operation Guide

Содержание StarTalk Mini





















































































































































































































































































































































































Отзывы:

Нет отзывов