nord NORDAC FLEX SK 2 E-111-123-A Series, Руководство пользователя

Страница: 140 / 284

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
140 BU 0200 en-US-4920
60 = Stator R ID Stator resistance determined by means of measurement (P220)
61 = Rotor R ID Rotor resistance determined by measurement ((P220) function 2)
62 = Stator stray L ID Leakage inductance determined by measurement ((P220) function
2)
63 = Stator L ID Inductance determined by measurement ((P220) function 2)
65 =
Reserved
Pos : 302 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P000- P099/Param et er P002 – Displ ay-F akt or @ 0\m od_1327573818457_14638.docx @ 14893 @ @ 1
P002
Display factor
(display factor)
S
0.01 ... 999.99
{ 1.00 }
The operating value selected in parameter P001 >Selection of operating value display< is multiplied
with the scaling factor and displayed in P000 >Status display<.
It is therefore possible to display system-specific operating values such as the flow rate.
Pos : 303 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P000- P099/Param et er P003 – Supervis or-Code [SK 1x 0E, SK 2xx E, SK 2xxE-FD S] @ 2\m od_1346931544673_14638. docx @ 42131 @ @ 1
P003 Supervisor code
(supervisor code)
0 ... 9999
{ 1 }
0 = The supervisor parameters and groups P3xx/P6xx are not visible, otherwise all.
1 = All parameters are visible, except groups P3xx and P6xx.
2 = All parameters are visible, except group P6xx.
3 = All parameters are visible.
4 = ... 9999, only parameters P001 and P003 are visible.
Information
Display via NORDCON
If parameterization is carried out with the NORDCON software, settings 4 ... 9999 behave like
setting 0. Settings 1 and 2 behave like setting 3.
Pos : 304 /Allgem ein/ Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0. doc x @ 2265496 @ @ 1