nord NORDAC FLEX SK 2 E-111-123-A Series, Руководство пользователя

Страница: 221 / 284

6 Operating status messages
BU 0200 en-US-4920 221
Pos : 645 /Anleit ungen/El ektr onik /FU und St art er/6. M eldung en zum Betriebsz ust and/Dars tell ung der Mel dungen @ 3\mod_1361802708455_14638. doc x @ 59828 @ 2 @ 1
6.1 Display of messages
Pos : 646 /Anleit ungen/El ektr onik /FU und St art er/6. M eldung en zum Betriebsz ust and/Dars tell ung der Mel dungen - LED Anz eigen @ 3\m od_1361796228478_14638.docx @ 59714 @ 5 @ 1
LED displays
The device status is indicated by integrated and externally visible status LEDs included in the factory
default kit. Depending on the device model, this is a two-color LED (DS = Device State) or two
monochromatic LEDs (DS Device State and DE = Device Error).
Meaning: Green indicates the standby status and the presence of mains voltage. During
operation an increasingly rapid flashing code indicates the degree of overload
of the device output.
Red indicates the presence of an error by flashing with a frequency which
corresponds to the number code of the fault. This flashing code indicates the
error groups (e.g.: E003 = 3x flashes).
Pos : 647 /Anleit ungen/El ektr onik /FU und St art er/6. M eldung en zum Betriebsz ust and/Dars tell ung der Mel dungen - Simpl eBox / C ontrolBox Anzeig e [ SK xxx E, SK 5xxP] @ 3\mod_1361801795294_14638. doc x @ 59822 @ 5 @ 1
SimpleBox display
The SimpleBox displays a fault with its number and the prefix "E". In addition, the current fault can be
displayed in array element [ -01 ] of parameter ( P700) . The last fault messages are stored in parameter
P701 . Please refer to parameters P702 to P706 / P799 for further information on device status at the
time the fault occurs.
If the cause of the fault is no longer present, the error display in the SimpleBox flashes and the error
can be acknowledged with the Enter key.
In contrast, warning messages are prefixed with "C" (" Cxxx ") and cannot be acknowledged. They
disappear automatically when the reason for them is no longer present or the device has switched to
the Fault state. Display of the message is suppressed if the warning appears during parameterization.
The current warning message can be displayed in detail at any time in array element [ -02 ] of
parameter ( P700 ).
The reason for an existing disabled switch on cannot be displayed with the SimpleBox.
Pos : 648 /Anleit ungen/El ektr onik /FU und St art er/6. M eldung en zum Betriebsz ust and/Dars tell ung der Mel dungen - Par ameter Box - Anz eige @ 3\m od_1361801566355_14638. docx @ 59780 @ 5 @ 1
Parameter Box display
The Parameter Box displays messages in plain text.
Pos : 649 /Anleit ungen/El ektr onik /FU und St art er/6. M eldung en zum Betriebsz ust and/Diagnos e LED s/Diag nos e LEDs am Ger ät (Ü bersc hrift+) [SK 1xxE, SK 2x xE, SK xx xE-FD S] @ 1\m od_1343201905326_14638. docx @ 36936 @ 2 @ 1
6.2 Diagnostic LEDs on device
The device generates operating status messages. These messages (warnings, errors, switching
statuses, measurement data) can be

3.1.1 "Use of control and parameterization units"displayed
with parameterization tools (e.g. Parameter Box) (parameter group P7xx ).
To a limited extent, the messages are also indicated via the diagnostic and status LEDs.
Pos : 650 /Allgem ein/ Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0. doc x @ 2265496 @ @ 1