nord NORDAC FLEX SK 2 E-111-123-A Series, Руководство пользователя

Страница: 70 / 284

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
70 BU 0200 en-US-4920
Pos : 165. 1 / Anleit ungen/El ektr onik /FU und St art er/2. M ont age und I nst allation/ Elek trischer Ansc hl uss/ SK 1x xE, SK 2xx E, SK 5xxP, SK xxxE-FD S/ St euert eil/Details St euer anschl üss e (Sammlung)/Details St euer anschl üss e_00_Tabell enkopf _[ SK 1xx E, SK 2xx E, SK 5xxP] @ 7\m od_1435561812889_14638. docx @ 228819 @ @ 1
Meaning, Functions Description/Technical data
Terminal Parameter
No. Designation Meaning No. Function of factory setting
Pos : 165. 2 / Anleit ungen/El ektr onik /FU und St art er/2. M ont age und I nst allation/ Elek trischer Ansc hl uss/ SK 1x xE, SK 2xx E, SK 5xxP, SK xxxE-FD S/ St euert eil/Details St euer anschl üss e (Sammlung)/Details St euer anschl üss e_01_D OUT [SK 1x 0E, SK 2xx E] @ 7\m od_1435562956782_14638. doc x @ 229139 @ @ 1
Digital outputs Signaling of operating status of the device
24 V DC
With inductive loads: Provide protection
using freewheeling diode!
Maximum load 20 mA
1 DOUT1 Digital output 1 P434 [-01] Fault
3 DOUT2 Digital output 2 P434 [-02] Fault
Pos : 165. 3 / Anleit ungen/El ektr onik /FU und St art er/2. M ont age und I nst allation/ Elek trischer Ansc hl uss/ SK 1x xE, SK 2xx E, SK 5xxP, SK xxxE-FD S/ St euert eil/Details St euer anschl üss e (Sammlung)/Details St euer anschl üss e_01_D OUT _Ergänz ung [SK 2xx E] @ 7\mod_1435562960093_14638.docx @ 229171 @ @ 1
Note:
Size 4: Max. load 50 mA
SK 2x5E: Voltage level depending on input voltage level (18 – 30 V DC)
Pos : 165. 4 / Anleit ungen/El ektr onik /FU und St art er/2. M ont age und I nst allation/ Elek trischer Ansc hl uss/ SK 1x xE, SK 2xx E, SK 5xxP, SK xxxE-FD S/ St euert eil/Details St euer anschl üss e (Sammlung)/Details St euer anschl üss e_02_AIN [SK 1x 0E, SK 2x 0E] @ 7\mod_1435563256730_14638.docx @ 229267 @ @ 1
Analog inputs Actuation of device by external controller, potentiometer or similar device
Resolution
12 bit
U= 0…10 V, R
i
=30 k
Ω
I= 0/4 … 20 mA
Burden resistance
(250
Ω
) via DIP switch
AIN1/2
Maximum permissible voltage at analog
input: 30 V DC
The analog signals are adjusted via P402 and P403.
+ 10 V reference voltage:
5 mA not short-circuit-proof
11
40
14
10
kΩ
11 10V REF + 10 V reference voltage - -
14 AIN1+ Analog input 1 P400 [-01] Setpoint frequency
16 AIN2+ Analog input 2 P400 [-02] No function
40 GND Reference potential GND - -
Pos : 165. 5 / Anleit ungen/El ektr onik /FU und St art er/2. M ont age und I nst allation/ Elek trischer Ansc hl uss/ SK 1x xE, SK 2xx E, SK 5xxP, SK xxxE-FD S/ St euert eil/Details St euer anschl üss e (Sammlung)/Details St euer anschl üss e_02_AIN _Ergänz ung [SK 2x 0E] @ 7\mod_1435563260457_14638. docx @ 229299 @ @ 1
CAUTION: SK 200E and SK 210E: Use terminal 12 instead of terminal 40 (AGND/0 V)
Pos : 165. 6 / Anleit ungen/El ektr onik /FU und St art er/2. M ont age und I nst allation/ Elek trischer Ansc hl uss/ SK 1x xE, SK 2xx E, SK 5xxP, SK xxxE-FD S/ St euert eil/Details St euer anschl üss e (Sammlung)/Details St euer anschl üss e_03_D IN [ SK 2xxE] @ 7\mod_1435562625904_14638. docx @ 229011 @ @ 1
Digital inputs Actuation of device using an external controller, switch, or similar device.
HTL encoder connection possible with DIN2 and DIN3.
as per EN 61131-2, type 1
Low: 0-
5 V (~ 9.5 kΩ)
High: 15-30 V (~ 2.5 -
3.5 kΩ)
Scan time:
1 ms
Reaction time:
4 - 5 ms
Input capacitance
10 nF (DIN1, DIN 4)
1.2 nF (DIN 2, DIN 3)
Cut-off frequency
(only DIN 2 and DIN 3)
Min.: 250 Hz, max.: 205 kHz
21 DIN1 Digital input 1 P420 [-01] ON right
22 DIN2 Digital input 2 P420 [-02] ON left
23 DIN3 Digital input 3 P420 [-03] Fixed frequency 1 (

P465[-01])
24 DIN4 Digital input 4 P420 [-04] Fixed frequency 2 (

P465[-02])
Pos : 165. 7 / Anleit ungen/El ektr onik /FU und St art er/2. M ont age und I nst allation/ Elek trischer Ansc hl uss/ SK 1x xE, SK 2xx E, SK 5xxP, SK xxxE-FD S/ St euert eil/Details St euer anschl üss e (Sammlung)/Details St euer anschl üss e_04_TF [ SK 1x xE, SK 2xx E] @ 7\m od_1435563263847_14638. docx @ 229331 @ @ 1
PTC thermistor input Monitoring of motor temperature using PTC
Use a shielded cable if the device is
installed near the motor. The input is always active. In order to make the device
operational, a temperature sensor must be connected or both
contacts must be jumpered.
38 TF+ PTC thermistor input - -
39 TF- PTC thermistor input - -
Pos : 165. 8 / Allgem ein/ Allgemei ngültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0. doc x @ 2265496 @ @ 1