6. Error Messages
Express5800/R320d-E4, R320d-M4 Maintenance Guide (VMware 5.5)
56
Chapter 1 Maintenance
(1)
Error messages
Error Message
Cause
Solution
8000
System variable is
corrupted.
Illegal setup information of BIOS was
detected.
Start BIOS Setup Utility (SETUP), and then
execute
Load Setup Defaults
and specify the
necessary settings.
If the same error is detected repeatedly in spite
of re-setting, contact your sales representative.
8001
Real time clock error
Real time clock error was detected.
Start SETUP, and then specify the correct date
and time.
If the same error is detected repeatedly in spite
of re-setting, contact your sales representative.
8002
Check date and time
settings
Incorrect date and time set on real time
clock was detected.
8006
System configuration
data cleared by Jumper.
The setup utility settings were cleared
using the jumper.
Follow the steps described in Chapter 1 (9.
Resetting and Clearing the Server).
8007
SETUP Menu Password
cleared by Jumper.
The setup utility password was cleared
using the jumper.
8800
DXE_NB_ERROR
An error was detected during
initialization of chipset.
Contact your sales representative.
8801
DXE_NO_CON_IN
An error was detected during
initialization of console.
8802
DXE_NO_CON_OUT
8803
PEI_DXE_CORE_NOT_FOUND
A flash ROM is corrupt.
8804
PEI_DXEIPL_NOT_FOUND
8805
DXE_ARCH_PROTOCOL_NOT_A
VAILABLE
8806
PEI_RESET_NOT_AVAILABLE
The system was not reset correctly.
8807
DXE_RESET_NOT_AVAILABLE
8808
DXE_FLASH_UPDATE_FAILED
The Flash ROM was not written to
correctly.
B000
Expansion ROM not
initialized
Failed to expand option ROM.
Disable expansion of option ROM of the board
that is not used for OS boot.
B001
Expansion ROM not
initialized - PCI
Slot 1
Option ROM expansion in PCI slot 1
failed.
Disable expansion of option ROM of the option
board that is not used for OS boot.
Start SETUP, and select
Advanced
→
PCI
Configuration
→
PCI Device Controller and
Option ROM Settings
→
PCIxx Slot Option
ROM
→
Disabled
. (xx: PCI slot number)
B002
Expansion ROM not
initialized - PCI
Slot 2
Option ROM expansion in PCI slot 2
failed.
B003
Expansion ROM not
initialized - PCI
Slot 3
Option ROM expansion in PCI slot 3
failed.
B004
Expansion ROM not
initialized - PCI
Slot 4
Option ROM expansion in PCI slot 4
failed.
B022
Serial Port
Configuration
Overlapped.
Overlapping serial port configuration
was detected.
Start SETUP, select
Advanced
→
Serial Port
Configuration
, and specify the setting again in
a way that the values of Base I/O or Interrupt in
Serial Port A
and
Serial Port B
will not be the
same.
C010
The error occurred during
temperature sensor
reading
An error was detected while reading
temperature sensor.
Contact your sales representative.
C011
System Temperature out of
the range.
A temperature abnormality was
detected.
It is possible that a fan has failed or is clogged.
Contact your sales representative.
