NEC N8800-184F Скачать руководство пользователя страница 28

Страница: 28 / 196

4. Maintenance of Express5800/ft series

Express5800/R320d-E4, R320d-M4 Maintenance Guide (VMware 5.5)

Chapter 1 Maintenance

4.1.5

Dump collection

ftsmaint dump path

This command generates a dump of the CPU module specified in the

path

argument.

The dumps for the ESXi host are saved in /var/core/vmkernel-zdump-MMDDYY.HH:mm.n.

* MMDDYY denotes the created date, and HH:mm.n denotes the created time.

* It may take certain time to create dump data file.

Note

The system must be duplexed before running this command.

Important If you run this command, the specified CPU module is made offline automatically,

and duplication of system is canceled. (The specified CPU module is made online

automatically upon completion of this command.)

Tips

The dump files cannot be deleted automatically. Check the /var/core directory size
periodically in order not to run out of the capacity. The size of a dump file is approximately
100 MB.

4.1.6

BMC firmware update

ftsmaint burnBmcs fw_file

This command updates the BMC firmware using BMC firmware file specified by

fw_file

argument.

Important

•

Shutdown the guest OS except for ftSys Management Appliance.

•

Make sure that I/O modules and BMC are duplicated before starting update of
BMC firmware.

•

Do not operate the machine and power supply unit while the firmware is
updated. The firmware is destroyed and modules may need to be replaced.

4.1.7

BIOS update

ftsmaint burnProm fw_file path

This command updates BIOS of CPU module specified by

path

argument using the BIOS firmware file

specified by

fw_file

argument.

Important

•

Shutdown the guest OS except for ftSys Management Appliance.

•

Make sure that CPU modules are duplicated before starting update of BIOS.

•

Do not operate the machine and power supply unit while the firmware is
updated. The firmware is destroyed and modules may need to be replaced.

Содержание N8800-184F





































































































































































































Результаты поиска

Содержание N8800-184F

Отзывы:

Похожие инструкции для N8800-184F

Бренды по названию

Популярные бренды

NEC N8800-184F, Руководство по обслуживанию

Результаты поиска

Содержание N8800-184F

Отзывы:

Похожие инструкции для N8800-184F

Бренды по названию

Популярные бренды