5. Checking the Duplicating Operation of Modules
Express5800/R320d-E4, R320d-M4 Maintenance Guide (VMware 5.5)
47
Chapter 1 Maintenance
When the CPU module is stopped, the status LED changes as follows. This indicates that one CPU
module is operating now.
[Indications of status LED]
LED
System
(3)
System FT LED
–
3.
Start the stopped CPU module.
Run the following command to start the operation of the CPU module stopped in step 2.
When the CPU module is started,
Hardware diagnosis, Memory Synchronization (Memory Copy),
and then the
Duplication Completion
are performed.
Note that the system is paused temporarily for copying memory during memory synchronization.
[Indications of status LED after completion of duplication]
LED
System
(3)
System FT LED
Green
# cd /opt/ft/bin
# ./ftsmaint bringup 0
