2. BMC Configuration
Express5800/R320d-E4, R320d-M4 Maintenance Guide (VMware 5.5)
181
Chapter 3 Useful Features
Item
Description
Default Value
Alert Level
Alert Level
Specify the kind of event to alert.
Error, Warning
Error
: When "Error" is detected in each sensor type, the
alert is sent to the checked address.
Error, Warning
: When "Error" or "Warning" is detected in each sensor
type, the alert is sent to the checked address.
Error, Warning, Information
: When "Error", "Warning" or "Information" is detected
in each sensor type, the alert is sent to the checked
address.
Separate Setting
: You can arbitrarily select the event and the address
(To:X) to alert in each sensor type.
Alert Test
Execute test by sending an alert by mail.
*10
–
*1:
When Mail Alert is enabled, at least one addresses should be enabled.
*2:
Can be specified only when To:X is set to "Enable".
*3:
Up to 255 characters including alphanumeric, hyphen, underscore, period, and @ (at mark) can be used.
*4:
Up to 63 alphanumeric characters exc, ", ?, =, <, >, #, and \ can be used.
*5:
Up to 255 alphanumeric characters, hyphen, and period can be used for full domain name or IP address.
*6:
Can be specified only when SMTP Authentication is set to "Enable".
*7:
When SMTP Authentication is set to "Enable", at least one of the authentic method should be enabled.
*8:
Up to 64 alphanumeric characters excluding " " blank, ",?, =, <, >, #, and \, can be used.
*9:
Up to 19 alphanumeric characters excluding " " blank, ",?, =, <, >, #, and \, can be used.
*10: Be sure to perform Alert Test after all the parameters are configured appropriately. Alert feature may fail
depending on configuration made for network or alert receiver.
