1-8 Before Using
CAUTION
High temperature
Immediately after powering off the system, system components such as hard
disk drive may be very hot. Wait for the server to cool down completely before
adding/removing components.
Make sure to complete installation.
Firmly install all power cords, interface cables and/or boards. An incompletely
installed component may cause a contact failure, resulting in fire and/or smoke.
Protect the unused connectors with the protective cap.
The unused power cord connectors are covered with the protective cap to
prevent short circuits and electrical hazards. Attach the protective cap to the
unused connector. Failure to follow this warning may cause a fire or an electric
shock.
During Operation
CAUTION
Keep animals away.
Animal’s waste or hair may get inside the equipment to cause a fire or electric
shock.
Do not place any object on top of the server.
The object may fall off to cause injuries, damage to hardware and/or a fire.
Do not leave the optical disk drive’s tray ejected.
Dust may get in the equipment to cause malfunction. The ejected tray may also
become a cause of injuries.
Do not touch this equipment when it thunders.
Unplug this equipment when it threatens to thunder. If it starts to thunder before
you unplug this equipment, do not touch this equipment and cables. There is a
risk of a fire or electric shock.