4-82 Windows Setup
9.
On [Paging file for each drive] box, change [Initial size] value to exceed more than the one that
is on [Total paging file size for all drivers] box. Change [Maximum size] to be larger than
[Initial size] and click [Set].
IMPORTANT:
The paging file sizes described above is the recommended sizes for acquire debug
information (dump file). The boot volume requires enough initial size to store the dump file.
Ensure to set an adequate paging file size in order to acquire correct debug information, as
the lack of paging file leads to the lack of virtual memory, resulting in a possible acquisition
of incorrect debug information.
As to [Recommended] value, refer to “Size of the Partition to be Created” on page 4-6.
Reconfigure the paging file when you added on memory according to the memory size.
10.
Click [OK].
A message prompting to restart may appear depending on changed settings.
Restart if prompted.
