MUTOH Kona 1400, Руководство пользователя

Страница: 65 / 218

User’s Guide Kona / Kona apparel cutting plotter
Basics
AP-75370 - Revision 1.1 65
3
Media loading procedure
Step 1:
Install the pre-printed media roll between the media holders. Position the roll and
tighten the media holders by fixing the thumb screws.
Step 2:
Guide the media as shown below:
Step 3:
Position the pressure rollers (1) so that every pressure roller faces a grit roll (2).
Each pressure roller has a tactile and audible click system to make it easier to
position them correctly.
Refer to
Pressure roller positioning on page 51
z
Note

In case of working with curled media, refer to
Loading curled media on page 69
.
1
2