MUTOH Kona 1400, Руководство пользователя

Страница: 165 / 218

User’s Guide Kona / Kona apparel cutting plotter
Through cutting
AP-75370 - Revision 1.1 165
7
7.2.4 Through cut settings
It is however not easy to match an ideal tool configuration setup in which the media weakness
suffers not radically from the multiple cut through samples accomplished. Therefore a perfect
harmony between your tool down force and tool up distance needs to be synchronised.
Via this menu, you can set the desired cut through parameters.
After setting these values, it is also possible to test if they match your needs
Follow the procedure below to the velocity and force:
Step 1:
Press the following buttons in order:

Settings

Cut through
Step 2:
Select the tool you want to use.
Step 3:
Set the values for the
velocity
and
force
.
Step 4:
Enter the desired values and confirm with
Parameter Description
Tool Select the tool you want to use for the cut through operation.
Velocity The speed of which the cut through routine is cut. Default: 10 cm/s
Force
The force on the tool during the cut through routine. Default: 250
gram
Tool Down Distance The distance of cutting through the media. Default: 10 cm
Tool Up Distance
The quantity of media left uncut to hold the sticker fixed to the
media.
Default: 0,1 cm
Note

Be aware that Software such as EasySign overrules your settings. Therefore it
is best to verify the settings in the used software as well.