MUTOH Kona 1400, Руководство пользователя

Страница: 62 / 218

User’s Guide Kona / Kona apparel cutting plotter
Basics
62 AP-75370 - Revision 1.1
Step 4:
Load the media properly:

It is best to hold the front edge of the media in the middle with one hand and with
the other hand the roll itself.

While holding the roll firmly into position, pull the front edge of the media forward
so that there is an even tension across the whole width of the roll (= equal
tension method).

Do NOT use the drilled holes to align a roll of media! Rolls can only be correctly
installed using the equal tension method.

The holes will help you monitoring if the media is not meandering too much.
Step 5:
Verify the media is cut off straight at the front to avoid media initialization
mismatches.
Step 6:
Select the media measure method.
Refer to
Load mode on page 104
Step 7:
Lower the pressure rollers as soon as all the correct settings have been made.
Refer to
Load length on page 106
Refer to
Auto shuffle on page 112
Indicates the max
working width when
working with a
Kona Apparel
Note

Make sure not to get stuck on the pressure roller lever, this could damage your
clothes.
Note

The head will move fast over the media. Be careful not to pinch your fingers
during this action.
Note

Cut files are clipped in case the cut file is larger than the media width.