MUTOH Kona 1400, Руководство пользователя

Страница: 174 / 218

User’s Guide Kona / Kona apparel cutting plotter
Maintenance
174 AP-75370 - Revision 1.1
8.1.3 Cleaning the cutter blade
Use following procedure to remove small media particles in the base part of the cutting blade
holder.
Standard knife holder
Step 1:
Hold the body (2) into one hand and unscrew the base part (1)
Step 2:
Remove the spring (3) and the cutting blade (4).
Step 3:
Blow away media particles accumulated in the top of the base part.
Step 4:
Remove the spring from the cutting blade and remove any residual material from
the blade tip
Step 5:
Place the spring back over the cutting blade and tightly screw the base part on the
body.
Knife holder with nonius
Step 1:
Take the body into one hand and remove the base part.
Step 2:
Blow away the media particles accumulated in the top of the base part.
Step 3:
Remove any residual material from the blade tip.