MUTOH Kona 1400, Руководство пользователя

Страница: 134 / 218

User’s Guide Kona / Kona apparel cutting plotter
Operation panel
134 AP-75370 - Revision 1.1
Step 2:
Depending on the settings made in the sheet-off parameter menu, one of the
following screens is displayed.
Refer to
Sheetoff on page 107
Step 3:
Press
Yes
to proceed the sheet-off routine.
If no media is loaded
Via this menu it is also possible to trim the front of the media while you are loading it. For
example, you have manually cut a piece of media. This means that the edge of the media will
not be completely straight. To trim the front side of the media, proceed as follows:
Step 1:
Raise the pressure rollers and insert the piece of media.

Make sure the media is laying as straight as possible, do not mind the front side.
Step 2:
Press the following buttons in order:

Actions

Sheet off

The cutter automatically performs a
sheet off operation.

The cutter feeds the media forward
so you can cut it off with a knife.

No sheet off operations are being
performed.