MUTOH Kona 1400, Руководство пользователя

Страница: 100 / 218

User’s Guide Kona / Kona apparel cutting plotter
Operation panel
100 AP-75370 - Revision 1.1
Step 10:
The media is fed forward
to present the test
pattern The media is fed forward
to present the test
pattern Following screen is
displayed:

Pull the media manually
forward until a bounding
box is visible.
Move the head a couple
of times over the
bounding box and press
OK
.
Step 11:
Weed out the square
and press
OK
Weed out the squares
and press
OK
m
If the epos alignment is
correctly executed,
following screen is shown:
Step 12:
The cutter automatically
measures the 4 sides of
the box, to know the
distance between the
EPOS sensor and the
knife tip. The EPOS laser
activates and moves to
the approximate centre
of the cross. In case the
laser is not positioned
on the centre, guide it to
the perfect centre of the
two squares and confirm
the position with OK. In case the alignment is not
well executed, the Kona /
Kona apparel will show
following warning:

Perform the above steps
again to become a
proper calibration.
Step 13:
The EPOS calibration is
finished. The EPOS calibration is
finished. The EPOS calibration is
finished.
Automatic
(Recommended)
Manual Position Manual colour