MUTOH Kona 1400, Руководство пользователя

Страница: 13 / 218

User’s Guide Kona / Kona apparel cutting plotter
Regulations and safety information
AP-75370 - Revision 1.1 13
1
1.3 Important notes

Technical problems and maintenance, which require the cutter to be opened, can only be
done by qualified personnel who were trained to repair this type of machine.

Unauthorized removing of covers and/or overruling safety locks can be dangerous and will
result in your guarantee becoming void.

After powering OFF the machine, wait at least 10 seconds before powering ON again. Not
respecting this time interval could damage the machine.

The cutter must be connected to an earthed mains socket-outlet.
This product is tested and approved by the Canadian Standards
Association (CSA), this to provide increased assurance of quality and
safety.
The product is tested according to IEC60950.
This standard tries to cover all safety aspects.

Mechanical, electrical

Choice of components

Choice of materials: flammability!

Connectors, cables

Fire enclosure
This means the product is safe for users, service personnel and
production personnel.
CSA International certification is not a legal commitment but it
assures the quality and safety of the machine.
FCC
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
ICES
This Class A digital apparatus complies with Canadian ICES-003.