MUTOH Kona 1400, Руководство пользователя

Страница: 122 / 218

User’s Guide Kona / Kona apparel cutting plotter
Operation panel
122 AP-75370 - Revision 1.1
Step 3:
Navigate the head and/or media using the arrows until you reached the desired
origin.
Cut Through - Trim Poster
After printing posters, it is possible to use the Kona / Kona apparel to trim the posters. Do this
as follows:
Step 1:
Load the poster in the cutter.
Step 2:
Install a knife at through cut depth or select the correct tool in the tool manager.
Refer to
Cut through depth on page 47
Refer to
Tool on page 83
Step 3:
Make your personal settings regarding the cut through feature.

Tool

Velocity

Force

Tool up distance

Tool down distance
Refer to
Cut through on page 108
for all details on how to change the
parameters.
Step 4:
Press the following buttons in order:

Actions

Cut Through

Trim poster
Step 5:
Set the approximate length and width of the poster.
Step 6:
Press
play
.
Note

It is possible to move both the head as media at the same time when touching
the jog screen in diagonal direction.