MUTOH Kona 1400, Руководство пользователя

Страница: 103 / 218

User’s Guide Kona / Kona apparel cutting plotter
Operation panel
AP-75370 - Revision 1.1 103
4
Accuracy
Use this setting to lower the amount of EPOS bounding box measurement warnings. For
example, you know that some step adjust distortion or spray around the bounding box lines
may occur, you can choose to lower the accuracy to a lower range. By lowering it, the
bounding box measurement will issue less warnings (or none), when there is a print distortion
detected.
Change the EPOS accuracy setting as follows:

Settings

Epos

Accuracy

Change the setting to
High, Middle or Low
and confirm by pressing
Important

The lower the selected accuracy, the lower the expected cur accuracy.
Note

In case the cutter measures a bounding box distortion or deviation that falls in
a lower range than the selected accuracy, a message screen appears asking if
you want to lower the accuracy range.
For example, the EPOS Accuracy level was set to High, but the Kona / Kona
apparel measures a print distortion that falls in the Middle range. In this case a
warning message will appear. If selecting Yes, the EPOS Accuracy setting is
adapted to the new value.