Monitor TAD-214-W300, Инструкция по установке и руководство по эксплуатации

Страница: 74 / 80

70
17 - Text Commands
The table below provides as aid-memoir please refer to relevant
instructions for detail of each command.
General Use: Command:
Query status of System Secret, status
Query Channel status (up to 3) Secret, state, name1 , n2 , n3
Query NMEA equipment secret, nmea
Query remaining SIM Credit secret, credit
Arm/Part Arm/Disarm Nautilarm secret, arm/part/disarm
Turn switched circuit on or off secret, switch, name , on/off
Turn GPS on or off secret, gps, on/off
GPS report (position, speed, direction of
travel) secret, gps
Set GeoFence radius (meters x10, ie.10m
=1) and alert mode (alarm & message or
message only) secret, fence, distance ,
alarm/message
Check GeoFence Settings secret, fence
Disable GeoFence secret, fence, disable
Set Up:
Phone set up ( # = 1-10 max 10 phones)
See Table 7.7.3.1.
secret, phone, # , phone# , event
mask
Delete phone. Secret, phone, # , delete
Check phone number secret, phone, #
Change password secret, password, newpassword
Set up Key Fobs ( # = 1-3 max 3 codes) secret, fob, # , code
Check Key Fob Code secret, fob, #
Delete Key Fob Code secret, fob, # , delete