Monitor TAD-214-W300, Инструкция по установке и руководство по эксплуатации

Страница: 10 / 80

6
Boat Control
All Monitor versions can be configured to switch one primary circuit by
the key fob and text message (we suggest your lights for safely boarding
when arriving back in the dark). Up to a further 8 boat circuits*
3
(
Monitor III
)
or 4 boat circuits (
Monitor II
) be remotely switched (by text only) even when
you are miles from the boat.
*
3
– 5 circuits (up to 8 if Siren, Strobe & Beeper are not required), requires suitable relays
Boat Tracking (via GPS)
Monitor comes with integrated GPS. This can be used for locating your
boats position whether on the sea or trailer (
all models
). In addition a
GeoFence can be set to provide a movement alarm (see ‘Boat Alarm’
above), an anchor alarm, provide position, speed and heading information
as well as a user definable ‘over - speed’ alarm (
not Monitor I)
.
Not just a modified car or house alarm
Monitor was designed through consultation with boat owners, marine
and security experts and builds on the previous Nautilarm platform.
It is a high quality unit designed for use in the challenging environment
and conditions found at sea, in particularly the Rugged version is aimed at
open or semi open craft.
Monitor has been designed with extremely low power consumption to
avoid battery discharge problems. It has built in boat battery monitoring
capable of monitoring up to 3 battery banks (
Monitor II & III – Monitor I only 1 bank
)
which alerts at a user definable voltage and its own internal back up
battery should the main power be cut or fail.
Accessories
There are a number of options to tailor the system to your requirements.