Monitor TAD-214-W300, Инструкция по установке и руководство по эксплуатации

Страница: 18 / 80

14
Table 4.2.1
Connector Channel Number Default Function
A 0V (Ground) Non Configurable
B Power feed Non Configurable
C Battery 2 (
not Mon I
) Non Configurable
D Battery 3 (
not Mon I
) Non Configurable
E Temperature (
not Mon I or II
) Non Configurable
F LED+ Non Configurable
G LED- Non Configurable
H S Non Configurable
I Speaker - Non Configurable
J Channel 1 Siren
K Channel 2 Strobe
L Channel 3 Bleeper
M Channel 4 RF Switch
N Channel 5 Switch II (
not Mon I
)
O Channel 6 Switch III (
not Mon I
)
P Channel 7 Switch IV (
not Mon I
)
Q Channel 8 Switch NMEA (
not Mon I or II
)
R Channel 9 Alarm (CH) I
S Channel 10 Alarm (CH)II
T Channel 11 Alarm (CH)III
U Channel 12 Alarm (CH)IV
V Channel 13 Monitor (CH) I
W Channel 14 Monitor (CH) II
X NMEA data (
not Mon I or II
) Non Configurable
Channels 15-24 Wireless Channels
4.2.2. - Terminals A, B, C, D, E, F, G, H, I and X have fixed configurations and
can NOT be re-configured.
4.2.3. - As examples
using default settings : -
4.2.3.1. - PIRs, Microwave Sensors, Magnetic Contacts or Security Loops
can be connected to any of channels 9, 10, 11 or 12 without any re-
configuration of the channel.
4.2.3.2. - The switched circuit to be controlled by the Key Fob & Text
Message should be connected to channel 4.
4.2.3.3. - Any other switched circuits
(Not applicable to Monitor I)
to be
controlled by text Message only should be connected to channels 5, 6 or
7.