Monitor TAD-214-W300, Инструкция по установке и руководство по эксплуатации

Страница: 75 / 80

71
Set Up cont.: Command:
Set auto status reporting time (days) secret, auto, days
Check auto status reporting time secret, auto
Set auto call time (days) & tel # secret, call, days, tel#
Change auto call time (days) only secret, call, days
Check auto call settings secret, call
Set low voltage warning (3 circuits) secret, voltage, v1, v2, v3
Check low voltage warning settings Secret, voltage
Setting the voltage to zero(0) disables
the monitoring on a battery
Set credit check string secret, credit, provider string
Turn on channel test mode secret, test, channel#
Turn off channel test mode Secret, test, off
Configure channel
See Table 10.1.3.1. secret, channel, channel# ,
configcode , name , RFcode
Disable a channel Secret, channel, channel# , 0
Check channel configuration secret, channel
Configure dead time (mins) secret, time, mins
Check dead time secret, time
Name the system (e.g. boat name) secret, name, boatname
Check system name secret, name
Set overspeed alarm (knots) secret, speed, knots
Check overspeed setting secret, speed
Reset unit (restore default settings)
WARNING all user configuration will
secret, reset
be lost
Reboot unit
Retains user settings and reboots the
secret, reboot
unit