Monitor TAD-214-W300, Инструкция по установке и руководство по эксплуатации

Страница: 50 / 80

46
Table 10.1.3.1.
Configuration
Code
Name Channels
Allowed
Description
0 Disabled 1-24 Disabled Channel
1 Tamper NC 1-24 Always active, will trigger Siren &
Strobe
2 Tamper NO 1-14 Always active, will trigger Siren &
Strobe
3 Tamper CH 1-14 Always active, will trigger Siren &
Strobe
4 Alarm NC 1-24 Active when full or part armed, will
trigger siren & strobe
5 Alarm NO 1-14 Active when full or part armed, will
trigger siren & strobe
6 Alarm CH 1-14 Active when full or part armed, will
trigger siren & strobe
7 Alarm NC SS 1-24 Active when full armed, will trigger
siren & strobe
8 Alarm NO SS 1-14 Active when full armed, will trigger
siren & strobe
9 Alarm CH SS 1-14 Active when full armed, will trigger
siren & strobe
10 Monitor NC 1-14 Always active, no siren or strobe
11 Monitor NO 1-14 Always active, no siren or strobe
12 Monitor CH 1-14 Always active, no siren or strobe
13
14 Beam 1-14 Active when full or part armed, will
trigger siren & strobe, triple beep if
blocked when armed
15 Beam SS 1-14 Active when full armed, will trigger
siren & strobe, triple beep if
blocked when armed
16 Siren 1-8 On when triggered - for 3 minutes
17 Beeper 1-8 Beeper
18 Armed 1-8 On when armed or part armed
19 Strobe 1-8 On when triggered - until disarmed
20 Switch 1-8 User controlled output
21 RF Switch 1-8 User controlled output (by RF
control button)
22 NMEA 1-8 On when reading NMEA Data