Mitsubishi MELSEC iQ-F, Руководство пользователя

Страница: 150 / 182

148
APPX
Appendix 4 Buffer Memory Areas
CH1 Logging hold request
Use this buffer memory area as a trigger to hold (stop) logging at any timing during the logging.
For details on the logging function, refer to the following.

Page 59 Logging Function
Setting a value other than the above causes a logging hold request range error (error code: 1D7  H).
When 'CH1 Logging enable/disable setting' (Un\G535) is set to Disable (1), the setting for 'CH1 Logging hold request'
(Un\G471) is ignored.
■
Buffer memory address
The following shows the buffer memory address of this area.
■
Operation of the logging hold processing
• When Disable (0) is set to 'CH1 Level trigger condition setting' (Un\G540), the logging hold processing starts by turning
off → on 'CH1 Logging hold request' (Un\G471).
• When a value other than Disable (0) is set to 'CH1 Level trigger condition setting' (Un\G540), the logging hold processing
starts after 'CH1 Logging hold request' (Un\G471) is turned off
→
on and the set level trigger condition is satisfied. When the
level trigger is enabled, use this buffer memory area as an interlock condition to operate the level trigger.
• If 'CH1 Logging hold request' (Un\G471) is turned on
→
off during the logging hold processing, the hold (stop) status is
cleared and the logging restarts.
■ Default value
The default value is off (0).
The stop status of the logging can be checked with 'CH1 Logging hold flag' (Un\G409).
Logging hold request Setting value
OFF 0
ON 1
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Logging hold request 471 671 871 1071 1271 1471 1671 1871
CH  Logging hold request (In FX2N allocation mode function) 9151 9152 9153 9154 9155 9156 9157 9158