Mitsubishi MELSEC iQ-F, Руководство пользователя

Страница: 153 / 182

APPX
Appendix 4 Buffer Memory Areas
151
A
CH1 Average processing specification
Set which processing is to be used, sampling processing or averaging processing.
Averaging processing consists of time average, count average, and moving average.
Setting a value other than the above causes an averaging process specification setting range error (error code: 191  H).
■
Buffer memory address
The following shows the buffer memory address of this area.
■ Enabling the setting
Turn off
→
on
→
off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■
Default value
The default value is Sampling processing (0).
CH1 Time Average/Count Average/Moving Average
Configure the time (for averaging), count (for averaging), and moving average count for each channel where the averaging
processing is specified.
The following table lists the setting ranges.
Setting a value other than the above causes any of time average setting range error (error code: 192  H),
count average setting range error (error code: 193  H), moving count setting range error (error code:
194  H), and the conversion processing is executed with the setting before error.
■
Buffer memory address
The following shows the buffer memory address of this area.
■ Enabling the setting
Turn off → on → off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
Setting value Setting content
0 Sampling processing
1 Time average
2 Count average
3 Moving average
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Averaging process specification 501 701 901 1101 1301 1501 1701 1901
CH

Averaging process specification (In FX2N allocation mode function) 1081 1082 1083 1084 1085 1086 1087 1088
Setting content Setting value
Time average When the input type is current, and voltage: 4 to 10000 (ms)
When the input type is resistance temperature detector, and thermocouple: 160 to 10000 (ms)
Count average 4 to 10000 (times)
Moving average 2 to 1000 (times)
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH

Time Average/Count Average/Moving Average setting 502 702 902 1102 1302 1502 1702 1902
CH  Time average/Count average/Moving average setting (In
FX2N allocation mode function)
2 3 4 5 6 7 8 9