manualshive.com logo in svg

Mitsubishi MELSEC iQ-F, Руководство пользователя

Продукт Mitsubishi MELSEC iQ-F - это инновационное решение для автоматизации процессов. Вы можете бесплатно скачать пользовательское руководство для данного продукта на {веб-сайте}. Руководство поможет вам понять функционал и настроить оборудование по вашим потребностям.

Поделиться
Скачать
background image

100

9  TROUBLESHOOTING
9.3  List of Error Codes

Digital output value varies

Conversion completed flag does not turn on

9.3

List of Error Codes

If an error occurs during operation, a multiple input module stores the error code into 'Latest error code' (Un\G0) of the buffer 
memory. In addition, 'Error flag' (Un\G69, b15) turns on. Turning on 'Error clear request' (Un\G70, b15) clears the error code in 
'Latest error code' (Un\G0) and turns off 'Error flag' (Un\G69, b15).
Error codes of a multiple input module are classified in minor errors or moderate errors.
 • Minor error: This error is caused by the setting failure of programs and parameters, and after eliminating the error cause, 

each function normally executes. (1000H to 1FFFH)

 • Moderate error: Hardware failures. The A/D conversion, and temperature conversion do not continue. (3000H to 1FFFH)
The following table lists the error codes that may be stored.

: This symbol indicates the number of the channel where an error has occurred. A numerical value of 0 to 7 is used to 

correspond to CH1 to 8.
(CH1: 0, CH2: 1, CH3: 2, CH4: 3, CH5: 4, CH6: 5, CH7: 6, CH8: 7)

: For what this symbol indicates, refer to Description and cause of error.

Check whether the offset/gain setting is correct.

Check that the offset/gain setting is correct. If the user range setting is used, 
change to the factory shipment setting, and check that the conversion is 
performed.
When the conversion is correct, perform the offset/gain setting again.

Check whether average processing specification is correct.

Check the setting of average processing specification from the "Module 
parameter setting" screen of GX Works3.
If the setting is different from the average processing you want to use, reset 
the average processing specification from the "Module parameter setting" 
screen.

Is an external input being made to a conversion disabled channel?

Do not input to a conversion disabled channel from an external device.

Check item

Corrective action

Check whether a conversion method other than sampling processing is set.

Check the setting of average processing specification from the "Module 
parameter setting" screen of GX Works3.
Review the setting of average processing specification and check the state of 
variation of 'CH1 Digital output value' (Un\G400) again.

Check item

Corrective action

Check whether all channels are set to be conversion disabled.

Check the setting of input type with GX Works3.
If there is no channel other than conversion disabled, please set the input type 
setting to one other than "Conversion disabled" for one or more channels from 
GX Works3 or sequence program.

Error code

Error name

Description and cause

Corrective action

0000H

There is no error.

1080H

Number of writes to offset/
gain settings reach limit error

The number of the offset/gain settings has 
exceeded the guaranteed maximum number.

Any further setting of offset/gain values may not be 
reflected correctly.

1090H

Conversion enabled CH 
combination unavailable 
error

In 2CH conversion mode, CH used for 
conversion enabled CH number is out of 
combination range.

Reconfigure CH to the conversion enabled with the 
correct combination for conversion enabled CH 
number.

1861H

Offset/gain setting 
continuous write occurrence 
error

The setting value has been continuously written 
to the flash memory 26 times or more in the 
offset/gain setting.

For the offset/gain setting, write the setting value 
only once per setting.

190

H

Input type/Range setting 
range error

• A value out of the range is set in CH

 Input 

type/Range setting.

• A value out of the range is set in CH

 Range 

setting (Offset/gain setting).

• Set  CH

 Input type/Range setting to the value 

within the range again.

• Set 0 or 1 in CH

 Range setting (Offset/gain 

setting).

191

H

Averaging process 
specification setting range 
error

A value other than 0 to 3 is set in CH

 Average 

processing specification.

Set a value of 0 to 3 in CH

 Average processing 

specification again.

Check item

Corrective action

Содержание MELSEC iQ-F























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-F

Waters 2690 Quick Start Manual preview
2690
Бренд: Waters Страницы: 55
Paradox IP150 Programming Manual preview
IP150
Бренд: Paradox Страницы: 2
Baby Trend TS42 Instruction Manual preview
TS42
Бренд: Baby Trend Страницы: 24
Baby Trend Navigator Instruction Manual preview
Navigator
Бренд: Baby Trend Страницы: 6
Baby Trend Expedition Instruction Manual preview
Expedition
Бренд: Baby Trend Страницы: 6
C3 Custom Coolers ROVER Owner'S Manual preview
ROVER
Бренд: C3 Custom Coolers Страницы: 16
J3C S20 Assembly Instructions preview
S20
Бренд: J3C Страницы: 2
Veeder-Root TLS Install, Setup, & Operation Manual preview
TLS
Бренд: Veeder-Root Страницы: 27
Valve Concepts 1078 Installation, Operation And Maintenance Manual preview
1078
Бренд: Valve Concepts Страницы: 18
K&K M1500 Installation Instructions Manual preview
M1500
Бренд: K&K Страницы: 6
LANGER EMV-Technik E 1 User Manual preview
E 1
Бренд: LANGER EMV-Technik Страницы: 48
Parker CK5-DN Quick Start Manual preview
CK5-DN
Бренд: Parker Страницы: 4
Dakota Digital BIM-01-2-FTCH Manual preview
BIM-01-2-FTCH
Бренд: Dakota Digital Страницы: 12
Kunert Professional LAVADO Operating Manual preview
LAVADO
Бренд: Kunert Professional Страницы: 29
Hach RTC105 Basic User Manual preview
RTC105
Бренд: Hach Страницы: 504
Therma-Stor 4028407 Installation Instructions Manual preview
4028407
Бренд: Therma-Stor Страницы: 20
McIntosh MHT200 Owner'S Manual preview
MHT200
Бренд: McIntosh Страницы: 68
Atmel AT91 ARM Thumb Application Note preview
AT91 ARM Thumb
Бренд: Atmel Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды